The following table lists all the various options that are available for the 86 series units. Under the heading "Standard configurations" you can find the options that are included for the configurations mentioned. The links take you to a description of the units.
Standard configurations | ||||||
Tanks | ||||||
1 | 160 liter tank | 86/160/004 | opt. | opt. | opt. | |
2 | 240 liter tank | 86/240/003 | yes | yes | yes | Standard, recommended unit |
3 | 320 liter tank | 86/320/003 | opt. | opt. | opt. | |
Standard options: | ||||||
Tank cover: | ||||||
11 | Low cover, non insulated | 86/000TC01 | opt. | opt. | opt. | Standard cover. |
12 | Raised cover, non insulated | 86/000TC02 | opt. | opt. | opt. | Recommended when better vapor tightness of tank is required. |
13 | Raised cover, insulated | 86/000TC02INS | opt. | opt. | opt. | Raised cover with insulation blanket. |
Insulation: | ||||||
14 | Sheet steel cover + insulation | 86/xxxINS01 | opt. | opt. | opt. | Can be fitted to standard tanks; retrofitting is possible. |
Oil buffer: | ||||||
15 | External oil buffer; 10 liters | 86/000EB01 | opt. | opt. | opt. | Is fitted to tank rim and covers normal oil outlet. Suitable to combine with level controlled oil pump. |
Stand: | ||||||
16 | Base frame for pump mounting | 86/000SD01 | yes | no | yes | Frame for mounting of 86 tank with pump in front of tank; fitted with leg-levelers to level the tank during installation and setup. |
17 | Extension legs for base frame | 86/000LE01 | opt. | n.a. | opt. | Set of legs for elevated mounting of 86 tank; to be combined with base frame; height …. |
18 | Stand with pump support underneath tank. | 86/000SD02 | no | yes | no | High stand for elevated mounting of 86 tank with pump mounted underneath; fitted with leg levelers to level unit during installation and setup. |
Foam control means: | ||||||
19 | Foam knock-off bar. | 86/000FB01 | opt. | opt. | opt. | Can easily be fitted on all tanks; prevents foam from flowing into oil buffer. |
Extensions: | ||||||
Rake systems: | ||||||
20 | Rake skimmer for removal of non liquid floating matter. See the video: | 86/000RS02 | opt. | opt. | opt. | Can be fitted on all 86 tanks; replaces standard tank cover. |
21 | Sludge rake to scrape out separated floating matter. | 86/000SR01 | spec. | spec. | spec. | Can only be fitted on tank with enlarged oil trough, during production. |
Flush systems: | ||||||
22 | Flush unit to increase cleaning intervals. | 86/000FU01 | opt. | opt. | opt. | Can easily be retrofitted onto existing tank. Replaces standard tank cover. |
23 | Flush header to increase cleaning intervals. | 86/000FH02 | opt. | opt. | opt. | Fitted during production; can be retrofitted but requires welding. |
Pumps & controls: | ||||||
Pump: | ||||||
31 | Progressing cavity pump; 750 liter/hour | 86/000PCP01 | no | yes | yes | Standard pump for gravity return configurations. |
32 | Progressing cavity pump; 1000 liters/hour | 86/000PCP02 | no | opt. | opt. | Do not use with 86/160/00x; Recommended for 86/320/00x. |
33 | Double diaphragm pump; plastic; 1/2 inch. | 86/000DDP01 | n.a. | n.a. | n.a. | PVDF pump components; 1/5 inch pump; maximum temperature 80 degr. C. |
34 | Double diaphragm pump; stainless steel; 1/2 inch. | 86/000DDP02 | n.a. | n.a. | n.a. | Stainless steel 304; 1/5 inch pump with thermoplastic membranes. |
35 | Double diaphragm pump; stainless steel; 1/2 inch. | 86/000DDP03 | n.a. | n.a. | n.a. | Stainless steel 316; 1/5 inch pump with thermoplastic membranes. |
36 | Centrifugal pump; 1000 liters/hour | 86/000CP01 | yes | no | no | Magnetically coupled pump; PVDF, max. temperature 70 degr. C |
Run dry protection: | ||||||
37 | Temperature sensor on stator for PCP pumps | PMP-RDP-TS01 | no | yes | no | For PCP pumps only; PT-100/NTC sensor must; be wired to clients control panel or plc. |
38 | Temperature monitor with sensor on pump stator; for PCP pumps. | PMP-RDP-TM01 | no | yes | no | For PCP pumps only; electronic temperature monitor must be mounted in clients control panel or in dedicated control panel (see below) |
39 | Fluid sensor on pump suction: for PCP pumps. | PMP-RDP-VF01 | no | no | yes | Vibrating fork type sensor to sense fluid in suction line of pump; shuts down pump if no fluid. |
40 | Level sensor in effluent compartment. | PMP-LS01 | yes | n.a. | n.a. | Conductivity type level sensor for pump on/off control. |
41 | Level sensor for mounting in clients tank, pit or bath. | PMP-LS02 | n.a. | n.a. | n.a. | Conductivity type level sensor. Is to stop pump when level falls below sensor pens. |
Controls: | ||||||
43 | Sheet steel; powder coated control panel | PMP-CS01 | yes | yes | no | Control panel with main switch, power supply components, pump switch and thermal protection and indications. |
44 | Motor switch box | PMP-CS02 | no | no | yes | Plastic box with pump switch and thermal protection. |
45 | Pneumatic air reducer | PMP-AR01 | n.a. | n.a. | n.a. | Used to adjust pump-rate (flow rate) of double diaphragm pumps. |
Miscellaneous: | ||||||
Strainers: | ||||||
51 | Stainless steel strainer to protect pump and remove coarse matter. | 94/2.2/001 | opt. | opt. | opt. | Strainer with basket, in/outlet 1" BSPM |
52 | Stainless steel strainer to protect pump and remove coarse matter. | 94/8.8/001 | opt. | opt. | opt. | Strainer with basket, in/outlet 2" BSPF |
53 | PP strainer to protect PCP pumps from chips and fines. | 94/1.6/104 | opt. | opt. | opt. | Strainer polypropylene; 1.6 dm2; 1,5 "bsp male |
54 | Stainless Steel strainer to protect PCP pumps from chips and fines. | 94/9.0/204 | opt. | opt. | opt. | Strainer stainless steel 316; 9 dm2; 1.5" bsp female; 1400 micron |
55 | Stainless Steel strainer to protect PCP pumps from chips and fines. | 94/9.0/204 | opt. | opt. | opt. | Strainer stainless steel 316; 9 dm2; 1.5" bsp female; 800 micron |
56 | Stainless Steel strainer to protect PCP pumps from chips and fines. | 94/18/204 | opt. | opt. | opt. | Strainer stainless steel 316; 18 dm2; 1.5" bsp female; 1400 micron |
57 | Stainless Steel strainer to protect PCP pumps from chips and fines. | 94/18/204 | opt. | opt. | opt. | Strainer stainless steel 316; 18 dm2; 1.5" bsp female; 800 micron |
Other: | ||||||
58 | coalescer filters | 86/xxxCF01 | opt. | opt. | opt. | Polypropylene coalescer pack for insertion in tank. |